田海霞

作者: 时间:2024-01-26 点击数:

名:田海霞

别:

学位/职称:博士/副教授

出生年月:1987年4月

电话号码: 13607974452

邮箱: thx19870425@163.com

讲授课程:材料科学基础、金属塑性加工学、工程力学

研究方向:金属材料相图热力学计算、塑性有限元模拟

出版著作及代表性论文:

(1)Guan Zehao;Tian Haixia*; Li Na; Long Jianzhan; Zhang Weibing; Du Yong; High-accuracy reliability evaluation for the WC–Co-based cemented carbides assisted by machine learning, Ceramics International, 2022, 49(1): 613-624

(2)He Meiling; Zheng Xiaoyu;Tian Haixia*; Mao Hong; Du Yong; Residual thermal stress,fracture toughness, and hardness in WC-Co cemented carbide: Finite element simulation and experimental verification, Journal of Materials Research and Technology, 2022, 21: 2445-2454

(3)Zhao Hongjin; Shen Wuyi;Tian Haixia*; Xu Guozuan; Du Yong; Investigation of ultra1fine WC–Co–Fe–Ni–Cr3C2 cemented carbide microstructure and properties based on phase diagram thermodynamics, International Journal of Materials Research, 2022, 113(10): 900-910

(4)Tian Haixia; Peng Yingbiao; Du, Yong; Zhang Yinghui; Zhang Shuyan; Zheng Jiangpeng; Optimization of the mechanical properties of ultra-fine WC-Co-Cr3C2 cemented carbides via an approach based on thermodynamic calculations and characterization of the experimental results by the Weibull distribution, Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, 2020,70: 1-6

(5)Tian Haixia; Zhang Mingyu; Peng Yingbiao; Du, Yong; Zhou Peng;Sintering behavior and mechanical properties of Cr3C2 doped ultra-fine WC-Co cemented carbides: Experment guided with thermodynamic calculations, International Journal of Refractory Metals and Hard Materials,2019, 78: 240-246

(6)Tian Haixia; Peng Yingbiao; Du, Yong; Microstructure and mechanical properties of ultra fine WC-10Cocemented carbides with Cr3C2 and NbC: Experimental investigation supported by thermodynamiccalculation, International Journal of Materials Research, 2018,109:284-290

(7)Tian Haixia; Chen Jun;Du Yong;Peng Yingbiao;Investigation of WC–Co alloy properties based on thermodynamic calculation and Weibull distribution,Materials Science and Technology,2019,1-7

(8)田海霞,杜勇,张迎晖,徐国钻,基于热力学计算WC-10wt%Co-Cr3C2-VC超细硬质合金烧结温度的设计,硬质合金,2022,39(06):446-453

主持承担科研项目及经费:

(1)国家自然科学基金委员会, 青年科学基金项目, 52201012, 亚稳有序析出相Co3W强化硬质合金粘结剂微结构调控机理研究, 2023-01-01 至 2025-12-31, 30万元, 主持。

(2)江西省科技厅,江西省面上基金项目,20232BAB204004,有序L12结构γ′析出相强化WC-Co-Al-X硬质合金粘结剂微结构调控机理研究,2023-07-01 至 2026-7-01, 10万元,主持。

(3)江西省科技厅, 江西省青年科学基金, 20202BABL214005, 基于热力学集成计算超细硬质合金成分和烧结工艺的理论设计及实验研究, 2020-01 至 2022-12, 6万元,主持。

(4)江西省教育厅,青年基金项目,GJJ191604,基于热力学计算WC-Co-Cr3C2-VC合金烧结温度的设计及实验研究, 2020-01 至 2021-12, 2万元,主持。

(5)赣州市科技局, 创新人才项目,基于集成计算模拟和关键实验调控WC-Co-Cr3C2-VC合金的强韧化, 2020-01 至 2022-12, 主持

(6)江西理工大学博士启动基金资助项目,超细WC-Co-Fe-Ni-Cr3C2硬质合金微结构及性能研究,2019-03至2021-03,10万,主持

江西理工大学材料科学与工程学院      电话:0797-8312422      地址:江西省赣州市客家大道156号
SCHOOL OF MATERIALS SCIENCE AND ENGINEERING