姓 名：邓声华

性 别：男

学位/职称：工学博士/副教授

出生年月：1986年11月

联系方式：18270740099

电子邮箱：shenghuadeng@hotmail.com

学科专业：材料科学与工程

讲授课程：《材料工程基础》《热工过程与设备》

研究方向：粉末冶金、金属材料增材制造、外场冶金

出版著作及代表性论文：

1. Deng Shenghua, Li Ruid*, Yuan Tiechui*, Xie Siyao, Zhang Mei, Zhou Kechao, Cao Peng. Direct current-enhanced densification kinetics during spark plasma sintering of tungsten powder. Scripta Materialia, 2018, 143: 25-29. (ESI 高被引)

2. Deng Shenghua*, Li Ruidi*, Yuan Tiechui, Yang Pan, Xie Siyao, Li Jianan. The preferential growth behaviors of the intermetallics at the W/Co interface during spark plasma sintering. Applied Physics Letters, 2020, 117: 194102

3. Deng Shenghua, Yuan Tiechui*, Li Ruid*, Zeng Fanhao, Liu Guanghong, Zhou Xiang. Spark plasma sintering of pure tungsten powder: Densification kinetics and grain growth. Powder Technology, 2017, 310:264-271.

4. Deng Shenghua, Li Ruidi*, Yuan Tiechu, Cao Peng, Xie Siyao. Electromigration-enhanced densification kinetics during spark plasma sintering of tungsten powder. Metallurgical and Materials Transactions A, 2019, 50:2887-2897.

5. Deng Shenghua, Zhao Hongjin*, Li Ruidi*, Yuan Tiechui, Li Lanbo, Cao Peng. The influence of the local effect of electric current on densification of tungsten powder during spark plasma sintering. Powder Technology, 2019, 356: 769-777.

6. Deng Shenghua, Zhao Hongjin, Li Ruidi, Shao Junqi, Li Jianan, Qi Liang*, Ojo Olanrewaju A.*, Chen Jiqiang*, Zhang Lina, Li Weirong. Composition design of low hot-cracking susceptibility of Al-Zn-Mg-Sc alloy and its formability during laser additive manufacturing. Materials Characterization. 2022, 193: 112304.

7. Deng Shenghua*, Li Jianan, Li Ruidi, Zhao Hongjin, Yuan Tiechui*, Li Lanbo, Zhang Yingjie. The effect of particle size on the densification kinetics of tungsten powder during spark plasma sintering. International Journal of Refractory Metals & Hard Materials. 2020, 93: 105358

8. Li Jianan, Zhao Hongjin, Deng Shenghua*, Liu Xu, Ojo Olanrewaju A., Zhang Lina, Li Weirong. Laser melting deposition of aluminum 7050 alloy: heat treatment, microstructure and mechanical properties. Materials Science and Technology. 2022, 38(15): 1266-1275

9. Li Ruidi, Niu Pengda, Deng Shenghua*, Tang Linjun, Xie Siyao, Yuan Tiechui, Weng Qigang. The Influence of Porous Structure on the Interdiffusion Kinetics of Cu-Ni System During Spark Plasma Sintering. Metallurgical and Materials Transactions A. 2020, 51(4): 1799-1807

10. Deng Shenghua*, Wang Longxia, Zhao Hongjin, Shao Junqi, Li Jianan , Ojo Olanrewaju A.*, Zhang Lina, Li Ruidi, Xu Liang. Microstructure and mechanical properties of selective laser melted Al-Zn-Mg-Si-Sc-Zr alloy with high hot-cracking resistance. Journal of Alloys and Compounds. 2024, 973: 172930

11. Shao Junqi, Deng Shenghua*, Zhao Hongjin, Lou Lihao, Shi Baosen, Chen Lvzhou, Xu Liang. Electromigration enhanced growth kinetics of intermetallics at the Cu/Al interface. 2024, 164: 108110

12. Shao Junqi, Yang Fei, Wang Jian, Deng Shenghua*, Liang Yong, Zhao Hongjin, Deng Tongsheng, Xu Liang. Effects of Ga and In on the properties of Zn-Al sacrificial anodes. Materials Science and Technology. 2023, 39(18): 3015-3024.

主持承担科研项目及经费：

(1) 国家自然科学基金委员会, 地区基金项目, 52264053, 电流辅助烧结粉末过程电迁移效应诱导的晶体择优生长机理研究, 2023-01-01 至 2026-12-31, 30万元, 主持

(2) 江西省科技厅，青年基金项目，20202BABL214026，强电流诱导的异质金属固固界面化合物定向生长行为及其物理机，2021-01至2022-12，6万元，主持

(3) 江西省科技厅, 面上项目, 20224BAB204019, 激光增材制造Al-Zn-Mg-Cu-(Er、Zr)合金非平衡凝固热裂倾向性预测及成分设计, 2023-01 至 2025-12, 10万元, 主持

(4) 江西省教育厅, 青年基金项目, GJJ190476, 放电等离子烧结过程电流对粉末致密化动力学的强化机理, 2020-01 至 2021-12, 2万元, 主持

(5) 赣州市科技局, 创新人才项目, 激光立体成形Cu-Al-Mn-Ti（Sc）形状记忆合金成分设计及性能调控, 2020-01 至 2022-12, 主持

(6) 江西理工大学博士启动基金资助项目，粉末放电等离子烧结过程电流非热效应对致密化的影响及定量表征，2019/03-2021/03，10万，主持