赵文敏

作者: 时间:2024-07-23 点击数:

 名:赵文敏

 别:

学位/职称:博士/讲师

出生年月:19947

联系方式:15970964387电子邮箱:zhaowenm@jxust.edu.cn

办公地点:稀土大楼C605

学科专业:材料科学与工程、材料工程

讲授课程:金属塑性加工学复合材料机械工程材料、金属材料综合实验

研究方向:铜基粉末冶金复合材料、钨基复合材料的制备

出版著作及代表性论文:

[1] Zhao Wenmin, Bao Rui, Yi Jianhong etc. Achieving a better mechanical enhancing effect of carbonized polymer dots than carbon nanotubes and graphene in copper matrix. Composites communication. 2021:100906.

[2] Zhao Wenmin, Bao Rui, Yi Jianhong etc. Improving mechanical and thermal property of pure copper matrix simultaneously by carbonized polymer dots (CPD) cluster. Materials science and engineering A. 805 2021:140573.

[3] Zhao Wenmin, Bao Rui, Yi Jianhong etc. Influence of carbonized polymer dot (CPD) structure on mechanical and electrical properties of copper matrix composite. Materials characterization. 2021: 111463.

[4] Zhao Wenmin, Bao Rui, Yi Jianhong. Enhancing the mechanical-electrical property simultaneously in pure copper composites by using carbonized polymer dots. Journal of materials science. 2021: 1-11.

[5] Zhao Wenmin, Bao Rui, Yi Jianhong etc. Fabrication of RGO/Cu composites based on electrical adsorption. Transactions of nonferrous metals society of China. 30(4), 2022: 982-991.

[6] Zhao Wenmin, Bao Rui, Yi Jianhong etc. Fabrication of CNT/Cu based composite with twice in-situ formation from powder preparation to sintering. Materials research express. 6(9), 2019: 095088-.

[7] Xu Jiahui, Zhao Wenmin, Li Shaoyu etc. Effect of structure of carbonized polymer dot on the mechanical and electrical properties of copper matrix composites. Metals. 12, 2022: 1701.

[8] Zhao Wenmin, Bao R, et al. Rapid and full densification of carbonized polymer dot/copper composites by low-temperature sintering. Advanced Engineering Materials, 2201549 (2023).

[9] L. Liu, R. Bao, Zhao Wenmin, P. Liu, J. Yi, Z. Ge, S. Ling, Vacant defect and nitrogen doping effects on the interface of graphene/Cu composites: Computational and experimental evaluation. Journal of Alloys and Compounds, 907 (2022).

[10]易健宏,赵文敏,鲍瑞等.新型碳量子点的合成、主要性质及其在新材料中的应用.粉末冶金工业.31(1),2021:8.(邀请论文:专家论坛)

[11]易健宏,赵文敏,鲍瑞等.纳米碳化聚合物的制备、性质及在材料中的应用.粉末冶金技术.2022, 40(5):401-412.(邀请论文)

[12]杨亚杰,李兆杰,赵文敏.烧结温度对碳化聚合物点/铜复合材料显微组织与性能的影响.粉末冶金材料科学与工程.26(6),2021:10.

[13]刘柏雄,魏民国,赵文敏.钨粉制备及其对钨合金性能影响的研究进展.江西冶金, 2024(001):044.

主持承担科研项目及经费:

1. CPD@CNT/Cu复合材料的界面调控及界面-性能耦合机理研究,国家自然科学青年基金,主持,在研

2. CPD/Cu复合材料的制备及CPD作用机理研究,江西省教育厅青年科学基金,主持,在研

3. 基于变速球磨碳化聚合物点/铜复合材料的制备工艺、显微组织及力学、电学性能研究,江西理工大学高层次人才启动基金,主持,在研

4. 高强高导CPD@CNT/Cu复合材料的可控制备及强化机理研究,云南省新材料制备与加工重点实验室创新研究课题重点项目,主持,在研

5. 超临界水蒸煤制氢耦合高纯金属粉体及先进铜基复合材料制备,江西省重大专项,参与,在研

科研成果(获奖、专利、版权、著作权、外观设计等):

(1) 鲍瑞,赵文敏,易健宏等. 一种碳纳米管负载石墨烯-铜纳米颗粒的复合柔性导电膜的制备方法. 2018102507324(授权国家发明专利)

(2) 易健宏,赵文敏,鲍瑞. 一种氧化石墨烯-碳量子点增强铜基复合材料的制备方法. 2021102945725

(3) 易健宏,赵文敏,鲍瑞.一种碳量子点复合氧化亚铜的制备方法.2019105747926

(4) 易健宏,赵文敏,鲍瑞.一种提高碳量子点增强铜基复合材料导热性能的方法.2019105747911

(5) 刘柏雄,黄少勇,赵文敏.氧化铈-铜复合粉末与氧化铈增强铜基复合材料的制备方法.CN116460301A

(6) 魏民国,刘柏雄,赵文敏,陈廷树,伍铭.一种分散均匀的微米级钨粉的制备方法.CN118106495A


江西理工大学材料科学与工程学院      电话:0797-8312422      地址:江西省赣州市客家大道156号
SCHOOL OF MATERIALS SCIENCE AND ENGINEERING